0201YA3R3CAT4A [KYOCERA AVX]

Ceramic Capacitor, Ceramic, 16V, 7.58% +Tol, 7.58% -Tol, C0G, 30ppm/Cel TC, 0.0000033uF, Surface Mount, 0201, CHIP;


型号：	0201YA3R3CAT4A
厂家：	KYOCERA AVX
描述：	Ceramic Capacitor, Ceramic, 16V, 7.58% +Tol, 7.58% -Tol, C0G, 30ppm/Cel TC, 0.0000033uF, Surface Mount, 0201, CHIP 电容器
文件：	总5页 (文件大小：718K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

C0G (NP0) Dielectric

General Speciﬁcations

C0G (NP0) is the most popular formulation of the “temperature-compensating,” EIA Class I ceramic

materials. Modern C0G (NP0) formulations contain neodymium, samarium and other rare earth oxides.

C0G (NP0) ceramics offer one of the most stable capacitor dielectrics available. Capacitance change

with temperature is 0 ±30ppm/°C which is less than ±0.3% C from -55°C to +125°C. Capacitance drift or

hysteresis for C0G (NP0) ceramics is negligible at less than ±0.05% versus up to ±2% for ﬁlms. Typical

capacitance change with life is less than ±0.1% for C0G (NP0), one-ﬁfth that shown by most other

dielectrics. C0G (NP0) formulations show no aging characteristics.

PART NUMBER (see page 4 for complete part number explanation)

0805

101

Size

(L” x W”)

Voltage

6.3V = 6

10V = Z

16V = Y

25V = 3

50V = 5

100V = 1

200V = 2

250V = V

500V = 7

Dielectric

C0G (NP0) = A

Capacitance

Code (In pF)

2 Sig. Digits +

Number of Zeros

Capacitance

Tolerance

Failure

Rate

A = Not

Applicable

Terminations

T = Plated Ni

and Sn

Contact

Factory For

1 = Pd/Ag Term

7 = Gold Plated

NOT RoHS

COMPLIANT

Packaging

2 = 7” Reel

4 = 13” Reel

U = 4mm TR

(01005)

Special

Code

A = Std.

Product

B = ±.10 pF (<10pF)

C = ±.25 pF (<10pF)

D = ±.50 pF (<10pF)

F = ±1% (≥ 10 pF)

G = ±2% (≥ 10 pF)

J = ±5%

Contact Factory

For Multiples

K = ±10%

NOTE: Contact factory for availability of Termination and Tolerance Options for Speciﬁc Part

Numbers. Contact factory for non-speciﬁed capacitance values.

The Important Information/Disclaimer is incorporated in these speciﬁcations

by reference and should be reviewed in full before placing any order.

022620

C0G (NP0) Dielectric

Speciﬁcations and Test Methods

Parameter/Test

Operating Temperature Range

Capacitance

NP0 Speciﬁcation Limits

Measuring Conditions

-55ºC to +125ºC

Temperature Cycle Chamber

Within speciﬁed tolerance

<30 pF: Q≥ 400+20 x Cap Value

≥30 pF: Q≥ 1000

Freq.: 1.0 MHz ± 10% for cap ≤ 1000 pF

1.0 kHz ± 10% for cap > 1000 pF

Voltage: 1.0Vrms ± .2V

100,000MΩ or 1000MΩ - µF,

Charge device with rated voltage for 60 ± 5 secs

@ room temp/humidity

Insulation Resistance

whichever is less

Charge device with 250% of rated voltage for 1-5

seconds, w/charge and discharge current limited

to 50 mA (max)

Dielectric Strength

No breakdown or visual defects

Note: Charge device with 150% of rated voltage

for 500V devices.

Appearance

Capacitance

No defects

Deﬂection: 2mm

Test Time: 30 seconds

±5% or ±.5 pF, whichever is greater

Meets Initial Values (As Above)

Variation

Resistance to

Flexure

Stresses

Insulation

Resistance

≥ Initial Value x 0.3

≥ 95% of each terminal should be covered

Dip device in eutectic solder at 230 ± 5ºC for 5.0

± 0.5 seconds

Solderability

with fresh solder

Appearance

No defects, <25% leaching of either end terminal

≤ ±2.5% or ±.25 pF, whichever is greater

Meets Initial Values (As Above)

Capacitance

Variation

Dip device in eutectic solder at 260ºC for

60sec- onds. Store at room temperature

for 24 ± 2hours before measuring electrical

properties.

Resistance to

Solder Heat

Insulation

Resistance

Meets Initial Values (As Above)

Dielectric

Strength

Meets Initial Values (As Above)

Appearance

No visual defects

Step 1: -55ºC ± 2º

30 ± 3 minutes

Capacitance

Variation

≤ ±2.5% or ±.25 pF, whichever is greater

Step 2: Room Temp

≤ 3 minutes

Meets Initial Values (As Above)

Step 3: +125ºC ± 2º

Step 4: Room Temp

30 ± 3 minutes

Thermal Shock

Insulation

Resistance

≤ 3 minutes

Dielectric

Strength

Appearance

Repeat for 5 cycles and measure after

24 hours at room temperature

Meets Initial Values (As Above)

No visual defects

Capacitance

Variation

≤ ±3.0% or ± .3 pF, whichever is greater

Charge device with twice rated voltage in test

chamber set at 125ºC ± 2ºC

≥ 30 pF:

≥10 pF, <30 pF:

<10 pF:

Q≥ 350

Q≥ 275 +5C/2

Q≥ 200 +10C

for 1000 hours (+48, -0).

(C=Nominal Cap)

Load Life

Remove from test chamber and stabilize at

room temperature for 24 hours

before measuring.

Insulation

Resistance

≥ Initial Value x 0.3 (See Above)

Dielectric

Strength

Meets Initial Values (As Above)

No visual defects

Appearance

Capacitance

Variation

≤ ±5.0% or ± .5 pF, whichever is greater

Store in a test chamber set at 85ºC ± 2ºC/ 85% ±

5% relative humidity for 1000 hours

≥ 30 pF:

Q≥ 350

Q≥ 275 +5C/2

Q≥ 200 +10C

(+48, -0) with rated voltage applied.

≥10 pF, <30 pF:

<10 pF:

Load

Humidity

Remove from chamber and stabilize at room

temperature for 24 ± 2 hours before measuring.

Insulation

Resistance

≥ Initial Value x 0.3 (See Above)

Dielectric

Strength

Meets Initial Values (As Above)

The Important Information/Disclaimer is incorporated in these speciﬁcations

by reference and should be reviewed in full before placing any order.

051818

C0G (NP0) Dielectric

Capacitance Range

PREFERRED SIZES ARE SHADED

SIZE

0101*

0201

0402

Reﬂow/Wave

All Paper

0603

Reﬂow/Wave

All Paper

0805

1206

Soldering

Reﬂow Only

Reﬂow/Wave

Paper/Embossed

Reﬂow/Wave

Paper/Embossed

Packaging

All Paper

0.40 ± 0.02

0.60 ± 0.09

1.00 ± 0.10

(0.040 ± 0.004)

0.50 ± 0.10

1.60 ± 0.15

(0.063 ± 0.006)

0.81 ± 0.15

2.01 ± 0.20

(0.079 ± 0.008)

1.25 ± 0.20

3.20 ± 0.20

(0.126 ± 0.008)

1.60 ± 0.20

(L) Length

(in.) (0.016 ± 0.0008) (0.024 ± 0.004)

(in.)

0.20 ± 0.02

(0.008 ± 0.0008) (0.011 ± 0.004)

0.10 ± 0.04 0.15 ± 0.05

0.30 ± 0.09

W) Width

(0.020 ± 0.004)

(0.032 ± 0.006)

(0.049 ± 0.008)

(0.063 ± 0.008)

0.25 ± 0.15

0.35 ± 0.15

0.50 ± 0.25

(t) Terminal

(in.) (0.004 ± 0.0016) (0.006 ± 0.002)

(0.010 ± 0.006)

(0.014 ± 0.006)

(0.020 ± 0.010)

WVDC

0.5

1.0

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

100

200

100

200

250

100

200

250

500

Cap

(pF)

8.2

100

120

150

180

220

270

330

390

470

560

680

820

1000

1200

1500

1800

2200

2700

3300

3900

4700

5600

6800

8200

0.010

0.012

0.015

0.018

0.022

0.027

0.033

0.039

0.047

0.068

0.082

0.1

Cap

(μF)

WVDC

SIZE

100

200

100

200

250

100

200

250

500

0101*

0201

0402

0603

0805

1206

Letter

Max.

0.33

0.22

(0.009)

0.56

(0.022)

0.71

(0.028)

0.90

(0.035)

0.94

(0.037)

1.02

(0.040)

1.27

(0.050)

1.40

(0.05 5)

1.52

(0.060)

1.78

(0.070)

2.29

(0.090)

2.54

(0.100)

2.79

(0.110)

Thickness (0.013)

PAPER

EMBOSSED

The Important Information/Disclaimer is incorporated in these speciﬁcations

by reference and should be reviewed in full before placing any order.

022720

C0G (NP0) Dielectric

Capacitance Range

PREFERRED SIZES ARE SHADED

SIZE

1210

1812

1825

2220

2225

Reﬂow Only

All Embossed

Reﬂow Only

All Embossed

Reﬂow Only

All Embossed

Reﬂow Only

All Embossed

Soldering

Packaging

Paper/Embossed

(in.)

WVDC

0.5

3.20 ± 0.20

(0.126 ± 0.008)

2.50 ± 0.20

(0.098 ± 0.008)

0.50 ± 0.25

(0.020 ± 0.010)

100

4.50 ± 0.30

(0.177 ± 0.012)

3.20 ± 0.20

(0.126 ± 0.008)

0.61 ± 0.36

(0.024 ± 0.014)

100

4.50 ± 0.30

(0.177 ± 0.012)

6.40 ± 0.40

(0.252 ± 0.016)

0.61 ± 0.36

(0.024 ± 0.014)

100

5.70 ± 0.40

(0.225 ± 0.016)

5.00 ± 0.40

(0.197 ± 0.016)

0.64 ± 0.39

(0.025 ± 0.015)

100

5.72 ± 0.25

(0.225 ± 0.010)

6.35 ± 0.25

(0.250 ± 0.010)

0.64 ± 0.39

(0.025 ± 0.015)

100

(L) Length

W) Width

(t) Terminal

200

500

200

500

200

Cap

(pF)

1.0

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

8.2

100

120

150

180

220

270

330

390

470

560

680

820

1000

1200

1500

1800

2200

2700

3300

3900

4700

5600

6800

8200

Cap

(pF)

0.010

0.012

0.015

0.018

0.022

0.027

0.033

0.039

0.047

0.068

0.082

0.1

100

WVDC

100

200

500

100

200

500

100

200

100

200

SIZE

1210

1812

1825

2220

2225

Letter

Max.

Thickness

0.33

(0.013)

0.22

(0.009)

0.56

(0.022)

0.71

(0.028)

0.90

(0.035)

0.94

(0.037)

1.02

(0.040)

1.27

(0.050)

1.40

(0.055)

1.52

(0.060)

1.78

(0.070)

2.29

(0.090)

2.54

(0.100)

2.79

(0.110)

PAPER

EMBOSSED

The Important Information/Disclaimer is incorporated in these speciﬁcations

by reference and should be reviewed in full before placing any order.

022720

IMPORTANT INFORMATION/DISCLAIMER

All product speciﬁcations, statements, information and data (collectively, the “Information”) in this datasheet or

made available on the website are subject to change. The customer is responsible for checking and verifying

the extent to which the Information contained in this publication is applicable to an order at the time the order is

placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee,

warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on AVX’s knowledge of typical operating conditions

for such applications, but are not intended to constitute and AVX speciﬁcally disclaims any warranty concerning

suitability for a speciﬁc customer application or use.

ANY USE OF PRODUCT OUTSIDE OF SPECIFICATIONS OR ANY STORAGE OR INSTALLATION

INCONSISTENT WITH PRODUCT GUIDANCE VOIDS ANY WARRANTY.

The Information is intended for use only by customers who have the requisite experience and capability to

determine the correct products for their application. Any technical advice inferred from this Information or

otherwise provided by AVX with reference to the use of AVX’s products is given without regard, and AVX assumes

no obligation or liability for the advice given or results obtained.

Although AVX designs and manufactures its products to the most stringent quality and safety standards, given

the current state of the art, isolated component failures may still occur. Accordingly, customer applications

which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as

installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component

does not result in a risk of personal injury or property damage.

Unless speciﬁcally agreed to in writing, AVX has not tested or certiﬁed its products, services or

deliverables for use in high risk applications including medical life support, medical device, direct physical

patient contact, water treatment, nuclear facilities, weapon systems, mass and air transportation control,

ﬂammable environments, or any other potentially life critical uses. Customer understands and agrees

that AVX makes no assurances that the products, services or deliverables are suitable for any high-risk

uses. Under no circumstances does AVX warrant or guarantee suitability for any customer design or

manufacturing process.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume

that all safety measures are indicted or that other measures may not be required.

The Important Information/Disclaimer is incorporated in these speciﬁcations

by reference and should be reviewed in full before placing any order.

121119

0201YA3R3CAT4A [KYOCERA AVX]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E